Search:

Type: Posts; User: rleffler

Page 1 of 11 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    25,461

    Aerosport Products installed the PEM nuts for...

    Aerosport Products installed the PEM nuts for mine. They did hang over the edge of the cutout very so slightly. I just filed the nuts until they were flush with cutout. No big deal. I don?t...
  2. Replies
    1
    Views
    13,630

    I’m on my third iteration panel. Iteration 1...

    I’m on my third iteration panel. Iteration 1 was 4500s with a 3400. Iteration 2 was 5500s with a 3400. Iteration 3 is 6600s with a 5500.

    The 3400 will have an OS version that hasn’t been...
  3. Replies
    3
    Views
    13,160

    I don’t know the costs, but Rob did mention that...

    I don’t know the costs, but Rob did mention that they can upgrade cpu, memory, gpu etc to bring it in line with 6600 specs. I would reach out to AFS for details and costs. I would assume that would...
  4. Replies
    2
    Views
    11,414

    Rob has several YouTube videos that shows the...

    Rob has several YouTube videos that shows the basic buttonology for flying an approach. That assumes everything is appropriately wired properly.

    I don’t have an Avidyne, but there should be a...
  5. Replies
    3
    Views
    13,160

    I thought all 5000 series have SV-Network...

    I thought all 5000 series have SV-Network support, which would support the AP servos and sv-AP-panel. It wouldn’t use the olde AP controller since that functionality is built into the efis.

    The...
  6. Replies
    4
    Views
    21,842

    I suspect something else is the issue. I just...

    I suspect something else is the issue. I just did a 13.5 hour cross country. My son’s iPad mini stayed connected the entire trip with no issues. The only difference is that I have 6600s now.
    ...
  7. Replies
    1
    Views
    11,686

    Sounds like you may have an older AFS ARINC...

    Sounds like you may have an older AFS ARINC module. If that is the case, upgrade to the Dynon SV-ARINC. If you already have the Dynon version, I would give Jonathon a call.
  8. Replies
    5
    Views
    39,988

    I suspect it’s an open circuit or you have a gps...

    I suspect it’s an open circuit or you have a gps issue. I have a newer model Garmin, so I’m not familiar with the 480. I’m assuming that there is a page that shows you what satellites you are...
  9. Replies
    5
    Views
    39,988

    Typically, when I see that message, the gps...

    Typically, when I see that message, the gps hasn’t synced with enough satellites yet. I’ve had the map show me someplace else until the gps has synced with the appropriate number of satellites.
  10. Replies
    3
    Views
    29,756

    Does Ken have a targeted release estimate yet? ...

    Does Ken have a targeted release estimate yet?

    If it’s out a ways, does uAvionics have an updater that is PC based that be used to upgrade the 472 firmware directly?
  11. Replies
    3
    Views
    29,756

    472 version 2.4.58 firmware upgrade

    I saw that Dynon/Uavionics released 2.4.58 for the 472. Is there a similar method to perform the firmware upgrade with an AF-6600?
  12. Replies
    0
    Views
    12,878

    472 version 2.4.58 firmware upgrade

    I saw that Dynon/Uavionics released 2.4.58 for the 472. Is there a similar method to perform the firmware upgrade with an AF-6600?
  13. Replies
    3
    Views
    12,834

    My first recommendation is to give Jonathon at...

    My first recommendation is to give Jonathon at tech support a call. You’ll want to get to know him. He can share all the known issues with some of the older devices.


    My first panel had 4500s...
  14. Many AFS/Dynon devices are SV network capable and...

    Many AFS/Dynon devices are SV network capable and require being plugged into a SV-Hub to communicate with each other. In the CAL menu, from the SV Network option, you can view the devices that are...
  15. Replies
    1
    Views
    29,818

    They are the same, so yes, I would follow the...

    They are the same, so yes, I would follow the bulletin instructions for your serial number. Give Jonathon a call if you have concerns.
  16. Replies
    16
    Views
    36,238

    The speed change wasn?t until one of the 16.10.*...

    The speed change wasn?t until one of the 16.10.* releases. I don?t recall the exact release, but the readme file will document the change.

    Think about if your Internet connection went from 50mb...
  17. Thread: PFD backup?

    by rleffler
    Replies
    5
    Views
    8,796

    I switched to the sv-ems when I upgraded from...

    I switched to the sv-ems when I upgraded from 4500s to 5500s about six years ago. If my memory is correct, it was a pretty easy upgrade. I think there were only one or two sensor wires that had to...
  18. Replies
    16
    Views
    36,238

    Is the ils working on the avidyne screen? Does...

    Is the ils working on the avidyne screen? Does it share a split antenna with the other nav radio? If working on the avidyne, I would look at the arinc speed setting for the vor/ils configuration....
  19. What is radio is com1? Did it ever work...

    What is radio is com1? Did it ever work properly? It may imply that that serial line to the radio has an open circuit, the efis wasn’t configured properly, or the radio config may not be set...
  20. Replies
    1
    Views
    19,819

    Are you using an internal flight plan or the one...

    Are you using an internal flight plan or the one on the GTN? I’m in the habit of using my GTN for all flight plans unless I’m going to a private airport that isn’t in garmin’s database. In your...
  21. Replies
    4
    Views
    3,640

    I had the same thing happen again today with the...

    I had the same thing happen again today with the runway image inverted and at the top of the screen. Blue sky and green ground were unaffected. It happened on the first flight of the day, but not...
  22. Replies
    4
    Views
    3,640

    I experienced this on one flight last week. It...

    I experienced this on one flight last week. It didn’t occur on the second flight of the day. It was on the PFD(6600). My other 6600 was on the map page and it didn’t impact the 5500. It self...
  23. Replies
    16
    Views
    36,238

    It should, with a mis-matched baud rate, arinc...

    It should, with a mis-matched baud rate, arinc won’t work properly.
  24. Replies
    16
    Views
    36,238

    I wired my gtn650 and sl40 the day after this was...

    I wired my gtn650 and sl40 the day after this was released. I’m starting to get lazy since you can load any of the frequencies off the freq tab on the airport screen to any of the supported coms.
  25. Replies
    16
    Views
    36,238

    I can’t answer your questions, but all the...

    I can’t answer your questions, but all the updates are documented in the release notes in the package and are grouped by released #.

    Yes, there are fixes that resolve known bugs. It’s also the...
Results 1 to 25 of 274
Page 1 of 11 1 2 3 4