Search:

UPDATE: The seems to be an issue with iPad connectivity with the Dynon WIFI system. When my iPhone connects it is given the IP address in the 192.x.x.x address space. But when my iPad after a few...

I recently upgraded to a iPad mini 6 running iOs 16.6.1, it has WIFI and Cellular and I am running Foreflight (current version.) This new iPad is replacing my old mini version 4 which does not...

Any update to getting this label changed to a user specified term?

During take-off acceleration the tonal stall warning starts at about 30 KIAS and continues until about 70 KIAS during climb out. I have adjusted Landing Override for the landing sequence and I do...

In regard to this information

"Setting the Alert Tone Start Bar to 16 will cause the AOA tones to start beeping at the normal approach AOA and become a steady tone at the red bar (15% above...

Shawn, I can be a beta tester if you need an additional user. I'm located in Portland OR area. I have an RV-7 with 5000T EFIS

I have used the carburetor temp probe to monitor the temperature of my EarthX battery. The EFIS displays carb XX for the temperature. Any chance that label could be changed to a user entered four...

Any update on the release? I would really like to have access to the AOA tones.

Thank you.

Scott

Flying an RV-7 and I would like to adjust the AOA settings to increase or decrease when the warnings activate. Is there a value that corresponds to approximately 1 KIAS change? For example my...

I spoke with tech support yesterday afternoon and learned this will be resolved in an upcoming release.

The donut is clearly visible, especially the green portion. The audio works and is clearly understandable and the flap position indicator is operating normally and clearly visible. The data comes...

Is there a method to adjust the brightness of the AOA chevrons? I

Thank you!

I have a 5500T with a TCW 6ah backup battery. When I download the logs the system records three voltages, backvolts, volts 1 and volts 2.

1. Where is backvolts measuring voltage? Given my...

Is there a limit to the number of lines within a checklist? I can not get items beyond line 11 on the CHKLST1.LINEn area of the checklist to display (AFS 5500T.) I have recreated the checklist to...

Dynon released a firmware update for the GPS 2020 to fix the NACv bug on the ADSB report among other issues. When will AFS release that update for the Dynon equipment through the AFS 5500?

Thanks

I have a AF-5500 with the TCW backup battery. Recently the TCW battery failed. TCW stated the battery had been discharged to the point of damaging a cell. I had to replace the battery. Other than...

Bringing this thread back up. Yesterday I was attempting to load flight plans from my iPad mini 4 via Foreflight to my AFS 5500T. I received the same error code on each of several attempts,...

I flew day and verified that I was receiving ground station data and could view the TFR text data on the TFR page. What I misunderstood was how the TFR and WX graphic data was displayed. That data...

Well, I thought I had wx turned on. Now I will have to check it out tomorrow morning. I am getting traffic through ads-b

I have a 5500T and the Dynon 470. The 5500 is not displaying any TFRs or wx. I am receiving traffic.

Is this a know software issue?

Thank you.

Scott

Is it possible to rename the carb temp label that is displayed on the engine screen? I am using it to monitor the battery temp of my EarthX battery, so Batt Temp would be ideal.

Thank you.
...

I would like to hook a J or K type thermocouple to the Dynon EMS to monitor my EarthX battery temperature. The battery is located on the firewall in the standard location for a Vans RV-7.

1. May...

I have my main buss connected to the SV-EMS pin 1 to measure alternator/battery voltage into the aircraft. I connected the IBBS battery information to pin 13 on the EFIS expansion plug. When I pull...

Thank you for that clarification.

Scott