No, the wifi adapter will not work with the 4500. And to my knowledge there are no plans to change this.
Type: Posts; User: nickm
No, the wifi adapter will not work with the 4500. And to my knowledge there are no plans to change this.
I apologize, I read your problem incorrectly, TAS as TAWS.
I pretty sure it's not an installation issue since you are getting TAS and WINDS on two of your units.
My guess is that your copilot...
Go into calibration and check your Synthetic Vision settings (option 35 on the main calibration page). Make sure TAWS (option 3) is enabled. This should get TAWS running on your copilot display....
A system update (on the VPX side) caused the VPX to stop sending the FLAP and TRIM labels for these pins. We caught this a while back and a fix is in place in version 9.4.68 and latter.
Photo's of the PFD (since that is the screen you are attempting to save the flight plan on if I understand correctly). The following sequence of 3 photos would actually be the most help in tracking...
Would it be possible to get a picture of the FILES listing under your flight plan on the device that has two flight plans listed?
Thanks
Nick
I'm not 100% sure about the answer to this as I've not tried it, and wasn't able to turn up a USB extension cable when I looked. However, so long as the end result is that you have 1 USB device...
No. It will move the approach plates on an SD card to the internal memory of you 5x00's, and will do NO action against sectionals, IFR LO's, and airport diagrams. Due to the speed of the SD card,...
Chuck,
The 5000 series operates in the same manner as the 3x00 and 4x00 series units when the main power is lost.
You've got it. The option is item 4 in the transfer items page in the 5500 "User File Restore".