Search:

Hello,
On the EMS-220 I can connect tank 3 on pin 22 and tank 4 on pin 23.
However on the EMS-221 there is no place to connect tank 3 even if the EMS221 on the rotax 912is has almost no wires or...

Hello Jonathon,
I tried to do it but is not working. The radio needs a firmware update?

Thank you,
Filipe

Hello,
On software version Vx16.06.15-TOUCH-MV16 it is written:
Adds support for Trig TY91 Headless Radio

On the installation manual I also see the option to assign a serial port to the TY91...

Hello,

There is a Lidar that can be applied to detect height over ground. The Benewake TF03 is able to measure up to 180m (590ft). This can be used for height advisory like a radio altimeter but...

Hello,
I have a AF5600 and a adsb transponder. Can i connect the audio outputs of the two togheter before going to my intercom single audio input or should i place some kind of device/box in the...

Thank you Jonathon,

I saw it on the installation manual but not on the user guide. That would be perfect because I am outside US without ADSB weather and don

Hello,
It is possible to connect a Stormscope WX-500? Or it is planned to have this function in the future?

Thank you,
Filipe

Hello,
I know that I can connect the G5 to the AF5600 for AHRS info. That is really nice. However I would like to know if the G5 can get the position, oat and navigation information via the same...

Hello Jonathon,

Thank you for your answer. Yes, I have a touch AF5600 but not the version with SV. In fact the advantage of my version is that it talks directly with the 912is engine which I think...

Hello,

I have a AFS5600 with the serial ports all used. It would be nice to have transponder remote controller, radio controller, vpx, autopilot and GPS / Arinc.
I am planning to fit a AF3500...

would also be interested on an editable temperature sensor name

Hello Jonathon, thank you for the answer. Yes, correct, but due my present economic situation, the price of shipping the parts to USAs and the upgrade is impossible. I am still interested but not for...

Hello, I want to know that if a Rotax 912i is connected to a can (non Skyview network model) to a 5600T it is possible to get a rpm output signal? I have a project with a propeller governor which...

Hello,
It is possible to connect the SV-GPS-250 to the AFS 3400?

Thanks,
Filipe

Hello,
I have installed a EFI for a rotax. It added a return line and the EFI system gives Fuel Flow according with injector pulse. It is possible by anyway to use this information on the EFIS? Or...