Does this require the SV-EMS-221 or can I use a serial port on the EFIS? Asking as the only reason I would buy the SV-EMS-221 is for Fuel flow and pressure given I have sensors already installed for...
Type: Posts; User: R7237
Does this require the SV-EMS-221 or can I use a serial port on the EFIS? Asking as the only reason I would buy the SV-EMS-221 is for Fuel flow and pressure given I have sensors already installed for...
Perfect. Thanks.
Wiring the panel with a ULPower 260 and dual screen 5500. Just curious if the CAN Bus from ULPower has been implemented yet. Thanks
Rob
Thank you very much for the response. This helps greatly. I should probably just buy another 5500 from you and gain the extra ports. Your response is just one example of why you are extremely...
Verified with Val Avionics that I can daisy chain the NAV 2KR and the COM2KR as SL-30 format on one serial port.
GPS source is my problem with the number of serial ports left. So, looks like
1)...
Small point, but took me a while to figure out the mobile site for the forum does not support the asterisk as my post kept getting truncated and took me a while to figure out. Ie: Do not as opposed...
I do not need a second GPS. I was following the manual v15.1 page 93 for installing the AF-GPS on a v7 system. I currently do not have a GPS source. Sounds like I need to do some homework and come...
Transponder is from a dual screen 5600 system that wouldn't fit in my current project. Was hoping to use parts of that system on this build, but sounds like the transponder should stay with that...
I have a AFS 5500 BB:7 single screen that I am installing. I am realizing that I will run out of serial ports. The screen has the Red Box remote AHRS. Current hardware I have:
1) VPX Sport
2)...
I have the first generation AFS 5600 (non-touch) and in the panel planning stages of the build. I am thinking about using the VAL 2KR COM and NAV radios as well as the PDA360EX-R. Just making sure...
In planning stage, and looking to add a nav radio to the panel for ILS/GS. Looks like two reasonable options of MGL and VAL. Using an AFS 5600 single screen version 1. Any preferences?
Thanks!!! sent in a quote for an Advanced Panel.
Any idea on timing? I know deadlines are often not set in stone, but sounds like if it is active work, I should be good by the end of the year.
Thinking about using the ULPower 350iS engine in the RV-12iS that I am finishing and since I will be EAB anyway, considering a AFS panel. Anyone install a 5600 in an RV-12?
If standalone, how is this interfaced to the EFIS?
Got an answer via phone and posting in case anyone else has the same question. You do not need an open serial port to install the AOA. Thanks
I have a single screen 5600. Serial ports are going to be used for VP-X, AF-ARINC (GTN650), remote transponder, AF-Pilot,,,,
Decided to consider the AOA option and am unsure if the EFIS option is...
Not sure if this is the best place to ask, but here goes. Looking for GPS for the AFS 5600, about to purchase. 430W's are finally starting to get on the used market and can be purchased for a...
Thanks for the update. Looking forward to the system, and yes, will also be buying a transponder from you.
Rob
Too early to ask? Hopefully getting a 5600 already ordered from you soon and trying to determine the best transponder. I heard rumored Oshkosh release of a remote transponder, just panel planning and...