Here's a note to close this thread.
I cycled the electronic setings several times for the servos again.
I disassembled my stick grip and exercised all the switches looking for anything which would...
Type: Posts; User: MDHarfst
Here's a note to close this thread.
I cycled the electronic setings several times for the servos again.
I disassembled my stick grip and exercised all the switches looking for anything which would...
Larco
Thanks for the feedback! I don't think you are in left field. Ringing out the wires to find a ground fault was on the list for me.
Confirmation helps prioritize my work. When I tear into...
Here is a question I need to get some suggestions on.
My 6 year old AFS built panel has an ACM, an AP control panel as well as the interface in the AFS 5600T screen to control two Dynon servos....
Hi Jonathon
Here is the update. I pulled off the hall effect sensor from the alternator cable and left it dangling.
I powered the ACM and the panel from a large DC power supply.
The engine was not...
Hello Jonathan
Thank you for the prompt reply, this is excellent information. I do have a couple of questions.
Q1: Should this be collected while the engine is running or with the engine off?
Q2:...
Dynon and AFS tech support must be backed up so here is a question for the gurus.
On my 3 year old AFS built panel, with an ACM and a hall effect sensor for amperage, I have had the readings drop...
Was this density altitude ever added to the display?