I bought an Air Traffic by Air Avionics that works as receiver for Flarm and ADSB. This Unit has 3 output interfaces for my avionics. The first is going to my Transponder as GPS Position (NMEA 4800...
Type: Posts; User: Mgeiss
I bought an Air Traffic by Air Avionics that works as receiver for Flarm and ADSB. This Unit has 3 output interfaces for my avionics. The first is going to my Transponder as GPS Position (NMEA 4800...
To send out an ADS-B out with my TRT 800 Transponder F.U.N.K.E.(or Funkwerk or Filser) i need a Serial Interface (RS232) with the following Data:
NMEA-Format, data format RMC is expected 4800...
Today i went to the Airport for a short flight with my RV7a. As i powered up the AF-3500S the Startscreen (a Picture of Robs Panel in Flight) comes, but then nothing happend. Normaly the Picture...
There ist a cheaper way to get the Mapd Data: http://www.pocketfms.com/EFIS/
Oh, sorry mgeissatgmx.de is the Email.
Markus
Hi Shawn,
We have the same Problem with our 3500S. Ca you please email me the instruction?
Mgeiss at gme.de
Markus
Thanks Rob,
If i cut the RS 232 line from the GPS to the AP, from where comes the information about the Track to the Autopilot if i fly in AP-Mode?
Markus
The serial Port at the AP is Pin 7 an 17?
Markus
http://advanced-flight-systems.com/Support/AdvancedDeckSupport/advanceddecksupport.html#data
Advanced Deck Sound Files
At the botton of the Side
Markus
From the AF-Pilot Installation Manual (Page 9):
"The AFS Pilot can follow a programmed flight plan from a GPS, independent of the EFIS system, by pushing the EFIS button. The screen will display...
On the Powerflarm Website:
Garmin RS232c TIS Interface:
Garmin aera 795 + 796: http://www.butterfly-store.de/Datenkabel+PowerFLARM+-+Garmin+aera+7...
Garmin aera 500 + 550:...
In the Manual you write: The AF-ARINC module should be connected to EFIS Serial Port #3 or Serial Port #4. The Serial 3 & 4 are already used and i now install the ARINC an the AF Pilot.
Are there...
Powerflarm is now also in the US: www.powerflarm.us
(In the moment only with Display, not the core)
Markus
Hi Christian,
Next Generation?
http://www.powerflarm.aero/index.php/DE/powerflarm-geraete/38-powerflarm-core-traffic-sensor
Markus
The Autopilot an the ARNIC-Interface have arrived this Weekend. There are some Questions bevor i start the installation.
The Wiring Diagramm of the ARNIC-Interface shows a Master Power with a 1 Amp...
That is the way i do it, until i wait for "Monday"
Just open the Aircraft AFD File with an Editor, chance the Units:
WEIGHT_UNITS, kg
LENGTH_UNITS, cm
LIQUID_UNITS, L
LIQUID_DENSITY, 0.721
...
We have a VFR-Day only RV7A (AFS 3500S-EM + 3400MFD with AFS-GPS, Garmin 495) and thinking about an Autopilot. Does it work to use the AFS-AP without an ARNIC-Adapter?
Thanks
Markus
The old forum is down. Is the marco still somewhere to find?
Markus
Is there a chance to get the metric units for the weight and balance in the future?
Markus
Hi Lancair 390
there will be an an new Traffic Monitor for Europe by www.garrecht.com. The new TRX-1500 can show ADSB and Flarm on different EFIS Systems...
We are also interessted in that integration.
Markus
Hy Rob,
1. If i disconnect i don!t get it anymore
2. The Intercom ist a Filser Com with built in Intercom ( http://www.funkwerk-avionics.com/cms/upload/Downloads/Flyer-ATR833.pdf ) with a...
I have a Noise of the Fan and the Dimmer in my Headset (Intercom). If the EFIS is on Backuppower the Noise is gone. If i regulate the Dimmer the Noise is gettig high and low like the Dimer. If i put...
Is there anything new about the european Mapdata?
Markus
Hi ken,
the Funkwerk does not support a Dataout. I have a discussion with one of the Funkwerkguys at the Aero in Friedrichshafen. At the Moment it is not on the List at Funkwerk, but he think...