Search:

Type: Posts; User: ao.frog

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Thanks alot Rob. I'll make the list and send you...

    Thanks alot Rob. I'll make the list and send you within a couple of days.
  2. (continued) However I don't think I have done...

    (continued)

    However I don't think I have done the setup 100% correct?
    Here's two of the setup's I've tried:

    http://img849.imageshack.us/img849/5320/1ktu.jpg

    ...
  3. What's the correct setup for this 4500s and 3400s and why doesn't synth vision work?

    Hi

    The final assembly is soon done, and we're now working with setting up and calibrating the EFIS'es.

    Today, we got the GPS up and running but the synethetic vision didn't work I think?
    ...
  4. Thanks for the reply Rob. Unfortunately, the...

    Thanks for the reply Rob.

    Unfortunately, the Norwegian LT (equialent to EAA) has decided that every plane shall have a printed copy of the POH onboard.
    The POH must be updated and current at all...
  5. Why not make updates for the manuals on a page-by-page basis?

    I'm about to print out a copy of the manual. (A paper-copy of the latest version of the manual is required here in Norway)

    Since it's well above 100 pages, it's quite a printing job. I'm wondering...
  6. How to get metric numbers on the W & B screen?

    I'm wondering how to get the W & B screen to show metric numbers?
    Right now, there's lbs, gallons and pounds showing and those numbers are not very useful in Europe.

    I have managed to get the...
  7. Thanks Rob. I'll wait with the printing job then....

    Thanks Rob. I'll wait with the printing job then.

    Standing by...
  8. Wrong dates and pics on both the S and non-S manuals?

    I'm just about the download and print out manuals for my new plane. It has a 3400s and a 4500s EFIS.


    I noticed today that there's some discrepancies with the heading and dates on the manuals in...
  9. sound?

    Is there sound to this video? I can't hear anything?
  10. Good news!

    Hi Rob.

    Thanks for chiming in With the good news! You just saved me the cost and work to install and hook up a Garmin 496 to the 4500! :D

    Hope the SW change also will make it possible to create...
  11. Can a software change make it possible to make waypoints in lat/long?

    Hi.

    Is it possible to make a software change for you guys at AFS so waypoints can be created in lat/long?
    I use that kind of waypoints (user created) much more often than VOR's, NDB's etc.
    It...
  12. Thanks for the reply. That was good news. :) I...

    Thanks for the reply. That was good news. :)

    I was looking in my manual which was the 7.0 version and in there it didn't show up. Found it on the mentioned page in the 7.4 version on the AFS...
  13. Why not display round instruments on the "s" models?

    Hi.

    I'm wondering why the "s" models can't display the good oldfashioned round flight instruments gauges?
    The non-s cpu EFIS's can do this, but not the new ones. (or am I wrong?)

    I often fly...
  14. Replies
    3
    Views
    6,838

    This is an old tread, but this winter I finally...

    This is an old tread, but this winter I finally found the problem: that the charger-circuit for the standby battery had failed and needed to be replaced.
    According to Rob, this was a problem with a...
  15. Great video Rob! Thanks for making it. That's a...

    Great video Rob!
    Thanks for making it.
    That's a great addition to the "software install instructions" in the manual.
  16. Thanks for the reply. That was a BIG relief!! :D...

    Thanks for the reply. That was a BIG relief!! :D

    Then another question comes to mind: you write "our database" as the source where I can find waypoints. I live in Norway and I think Jeppesen is...
  17. Possibly stupid question about 4500s NAV-capability

    Hi.

    I have bought and installed a 4500s, a 3400s slave screen, synthetic vision and a GPS-receiver antenna for my RV-7.
    The plan is to use the 4500 as a EFIS and the 3400 as a map-screen with...
  18. Thanks for chiming in Rob. The EFIS are out for...

    Thanks for chiming in Rob.
    The EFIS are out for the moment due to final wiring, but I'll check the items you mentioned once the 4500 is back in late next week, and I'll report back then.

    regards...
  19. Fuel press on the 4500 shows 10 PSI with engine not running

    Hi.

    We've just finished wiring the 4500 and all seems to work fine except the fuel-pressure: it shows 10 PSI with the engine not running.
    Anyone have an idea why?

    Thanks
    ...
  20. Replies
    3
    Views
    6,838

    The 3500 doesn't run on internal power.

    Hi.

    My RV-7 has just spent about 3 1/2 weeks on the ground due to some engine problem.

    I've fixed that problem and today it was time for a testflight.
    After power-up and just before engine...
  21. A follow-up...

    Just wanted to post a follow-up on the tread above:

    A while after this tread was written, I adjusted the K-factor from 180 (the std setting for litres) to 202.
    That was the K-factor I figured...
  22. Replies
    2
    Views
    4,382

    Hi. Just an update to this tread: I've now...

    Hi.

    Just an update to this tread: I've now installed the new type OAT-sensor: the one looking almost like a little airfoil. (earlier I had the old style: it looked like a little round "pin")
    With...
  23. Replies
    8
    Views
    11,656

    Hi. Just an update to the tread above: I've...

    Hi.

    Just an update to the tread above: I've had no more "hung-starts" on the 3500 since I re-updated my 3500 with a SanDisk 2GB SD card.
    Therefore it seems to me like the problem is solved....
  24. Replies
    2
    Views
    4,382

    OAT displays wrong values. What to do..??

    Hi.

    I can't get the OAT to show correct values and I think the fault is that mine...?

    I have entered two calibration points but the current manual doesn't say anything about entering any...
  25. Thread: Erratic Clock

    by ao.frog
    Replies
    7
    Views
    4,564

    Clock slows down here.

    Hi.

    On my 3500 the clock slows down approx 5 minutes per month. Could this be a sign that the clock battery schould be changed? It doesn't sound logical to me....?

    The 3500 is was bought Spring...
Results 1 to 25 of 40
Page 1 of 2 1 2