Should the Trutrack VSVG follow the heading bug of the AF-4500? I am using the ARINC interface between the EFIS and AP. If it is, it doesn't. Checked pinouts and cannot find an error. Also...
Type: Posts; User: rv8iator
Should the Trutrack VSVG follow the heading bug of the AF-4500? I am using the ARINC interface between the EFIS and AP. If it is, it doesn't. Checked pinouts and cannot find an error. Also...
SHould the heading bug (and alt bug) on the 4500s control roll and pitch of the Tru Track VSVG? What is the function of the autopilot source switch?
I have completed the troubleshooting...
Yes, I have Synthetic vision...
Both 3400Em and 4500EF are "S" CPUs. The 4500EF serial #2 (alt out to GTX327) will be mirrored on the 3400EM ser #2? I have the 4500EF and 3400EM serial #2 configured as TFC/ICARUS.
When...
I have a 4500 and 3500 and a Navworx ADS600B. I connected the navworx display to the 3500 serial #3. I connected the Navworx encoder (in) to the 3500 serial #2. Can I pass data from the 4500...
GPS log would be helpful for post flight analysis of piloting skill, as well as systems fault analysis.
Chris Stone
Thank you Rob,
That's the gem I was looking for. (no calibrated leak).
Another publication recommends a max. leakdown rate of 2 knots/2min for the pitot system.
...
The static system is open to atmosphere.
Some addition head scratching concludes... The way my manometer is plumbed allows the pressure at the AFS4500 pitot port to leakdown resulting in a...
I have a 4500 installed and am the process of checking system operation prior to closing up the forward sheet metal on an RV-8. I have set up a water manometer to check pitot line integrity and ASI...
I have a 4500 installed and am the process of checking system operation prior to closing up the forward sheet metal on an RV-8. I have set up a water manometer to check pitot line integrity and ASI...
I'm installing the Navworx ADS 600 with an AFS 3500 and 4500 and GTX 327. I understand the serial connections in/out. I also see the post with connection of the ADS 600 pin 35 to the xponder...
I did not specify capacitance fuel probed when I ordered my AF 3400. Does it need to go back for mod in order to use the capacitance sender? Or can I use the Dynon capacitance converters without...
Have you info on the AFS Comm? Is this a new product? Details?
VAL Avionics starts delivery of the remote mounted comm radio soon. The VAL tech stated it will work with the AFS 5000 series. ...
What defines "new magnatometer"? Mine was manufactured 6/2011. I mounted it at 7 degree pitch to match the panel inclination on my RV-8.
Is there any reason NOT to mount the arinc adapter to the side of the AF-4500 (opposite side from the fan)? w/ Psa/velcro attachment.
Drawing 53600WD B Rev 9 (the PDF on the site AF-4500 support page) show the EFIS expansion connector as a 15 pin D connector. I have an A-4500 and AF-3500 screen. Both have DB-9 connectors.
...
Does power for the AFS GPS (Garmin 18x 5HZ) come from ships power or can it be sourced from the AF-4500? Can't find any reference for powering. I assume it's referred to as the AFS GPS.