Lately some german airspaces where not displayed on the EFIS. Shawn modified the DLL file (Version 07) for PocketFMS and it works well again!
Christian
Type: Posts; User: lancair390
Lately some german airspaces where not displayed on the EFIS. Shawn modified the DLL file (Version 07) for PocketFMS and it works well again!
Christian
Try the data from my IO390. This comes very close to your angle valve 360. Use also the HP delta and make sure you have no set points without data....
When I start my engine CHT3 does not climb as usual and shows lower temps.
All 4 CHT's start with the same temp, only CHT3 climbs slower.
After 3 minutes and alway with 180°F it goes in it's...
Do I need then another free serial port?? Or can I share one of the ports in use.
Actually mine are all used.
What does "Fixed TIS serial parser" mean?
Christian
Hi
I'm looking for the settings of the advanced pilot for a Lancair 360MKII
There are 2 sets of settings: AP and EFIS mode.
My system needs some fine-tuning, so it would be interesting to compare....
Here are my % power settings for the IO390.
Make sure there are no empty set points. This was my problem for a long time...
Christian
222
Hi Rob,
will be the above feature part of a future update update?
This would be really great for us european pilots as we need this for our airframe logbook and pilot logbook.
I have attached 2...
Thank you for your kind assistance!
The Powerflarm is a great safety device as you can see all kind of aircrafts with only one device.
ADSB only shows you only commercial aircrafts.
The real...
Rob,
in my last flight I had the above problem again.
I had one traffic target on my efis and my 496
I have seen the target looking out my window.
Problem:
The 496 was right and the efis was...
Don't have a date, but it's coming soon...
Just wondering why you get so upset. The actual 4500 software works stable and updates are free of charge.
Christian
Michael,
you need a little more patience...
It's coming soon.
Christian
It's online!
AF4000 V8.08.25-MV16 System Software Updated 4/4/14
Advanced will decide what start up screen.
In the "Map data file" you will see what file is used.
I tried the latest pocketFMS Map file on my 4500 today and it worked well.
Christian
199
I'm still on mid Feb. data. Will let you know more when I update to march soon.
Christian
Rob,
this are great news!
I'm hardly waiting for the Flarm interface.
Currently ADSB traffic via TIS has a bug. Traffic is always shown 180° opposite!!
I did not believe in the beginning, but...
On my last flight I discovered something interesting:
There was only 1 traffic target on the EFIS screen and Garmin 496,
but they where on opposite direction as you can see on the picture.
As I...
Saving the take off and landing time would be a great feature!!
I use a Garmin GPS 496 and the only reason I take it home is to save the times.
As the 496 cannot display the take off and landing...
Rob,
the Flarm NMEA protocol provides direct traffic information without converting them into Garmin TIS protocol.
The advantage of the Flarm NMEA protocol would be to see more than max 8 traffic...
Rob,
are there plans that the 4500 will use the NMEA protocol from the PowerFlarm?
Christian
Finally my power flarm core works!
Main problem was the location of the gps antenna of the flarm. On top of the panel next to another gps and a flarm-adsb antenna and a compass it will not work....
I'm very pleased with PocketFMS map data!
Now I can see all this small airfields which you can't see on the Jepesen data and for a very small price we get monthly updates.
thank you Rob!
@Mounz
I bought a Powerflarm Core at the Aero.
Now I'm searching good locations for the antennas in my Lancair.
As the Canopy frame has carbon all around it will get a challenge. (rest of plane is...
Thank you Shawn for the picture!
Now I can't miss my home airport ;-)
Christian
I'm very happy that PFMS is integrated in the EFIS.
Looking forward to meet you there!
Christian