Garmin GDL82 / AFS 5000

Does the AFS 5000 have an audible “UAT Failure” alarm that can be activated from the GDL82?

If it does, input and setup data, please.

Thanks,


BJC

You would connect the devices failure annunciation to any open "Input #X" on the EFIS Main Cable. Input #1 on pin 17, #2 on 20, and #3 on 8. Then use SET -> Hold CAL -> Inputs -> and setup the pin selected for your “UAT Failure” message. Additional information can be found in the AF-5000 Manual.

Thanks. You confirmed what I thought that I understood about the alarm input.

Is the audible message “UAT Failure” already available in a file or is it necesary to create it in some way?

Thanks,


BJC

The audio alert will just be the default alert beep along with the "UAT Failure", or whatever you type in, displayed on the alerts bar.

Quote:

---

Originally Posted by Shawn McGinnis

The audio alert will just be the default alert beep along with the "UAT Failure", or whatever you type in, displayed on the alerts bar.

---

Thanks Shawn. That answers all my questions. (For now.��)


BJC