Generic input alarms with timeouts
Hi AFS,
For a 4500EE, is it possible to configure a generic input with a timeout? I can't seem to find a combination that works. The closest I've found is to configure an input as a tank xfer but I can't change the displayed label to 'Boost Pump'.
Thank you,
/\/elson
How is timeout supposed to work?
I've been trying to get timeouts to work as well in an AF3500. To get the labels to display with nothing connected to theu nit I set the logic to "Normally Closed". Then the green square lights up on the switch input indicating that the input is active. No matter what I put in the timeout field, the label appears on the display in run mode.
Does the timeout function act as a "delay" and inhibit display of the label (and audio) when the switch input become active? I think this is how the manual implies it should work.
Or does the timeout function act as a true "timeout" and cancel display of the label after a specified period has elapsed since the switch input became active?
In either case, if you select normally closed for the logic you get the labels with no apparent variation over time.
Also, is there a way to associate an audio file with a generic input?
PS - I'm running 7.3.7-MV15 in an AF-3500EF.