Is it recommended/required to dampen the MAP between the cylinder head and the MAP sensor?
Printable View
Is it recommended/required to dampen the MAP between the cylinder head and the MAP sensor?
If so... what if the best or recommended method?
We don't currently specify any additional buffer within the installation
Manual v4 Pg 221: The manifold pressure transducer should be mounted on the firewall or in the cabin area. The transducer port is connected to the engine manifold pressure port with a ΒΌ” ID hose and hose clamp. The manifold pressure port location can be found in the engine manual.
Thanks Shawn