G5 providing backup ADAHRS data

Hi

On page 31 of the AF-5000 Pilot Guide, it says that the

"AF-5000 can be connected to a Dynon SV-200 Primary, SV-201 Backup ADAHRS using the Dynon SV-NETWORK and a backup EFIS (Garmin G5) that can provide ADAHRS data on a separate RS-232 serial connection."

Has anyone done this...used the G5 as a source of backup ADAHRS info? Any insight as to how best to wire it? (I have a single 5600 and an ACM.)

Thanks,
Glen

I used this diagram from AFS and it worked fine. Attachment 577Attachment 578

On a single AF-5600 ACM system, the only potentially free serial port is going to be serial #1, which, if not already in use by a remote audio panel, would be free to use for the G5 backup ADAHRS function. You can access PFD#1 through pins 12/25 on the ACM Audio panel connector.

Attachment 579