I have a AF5600 and a GTN650. The efis will draw all phases of the flight plan except the holding patterns and procedure turns. Is this normal?
Still thinking it is a configuration issue instead of a wiring issue - I am using the ACM install manual and the AF-5000 Pilot's guide to configure menus.
Section Widget
Categories Widget (Show All)
Recent Articles
Recent Article Comments Widget
Recent Blog Posts
AF5600 will not draw holding patterns/ PT
I have a AF5600 and a GTN650. The efis will draw all phases of the flight plan except the holding patterns and procedure turns.
airtoby Today, 09:44 AMIs this normal?