Lycoming manual? Erase all settings? How to enable admin mode enable ..?

[Alexw]

Why large sections of the manual for rotax and jabiru ? For lycoming just two line.
How to delete all the system settings? How to enable admin mode ..what is default password?
Why do not you at least two versions of the configuration files? It would be very handy. (xxx_old.xx or date) it's very small size.

[Rob Hickman]

Why large sections of the manual for rotax and jabiru ? For lycoming just two line.

Most of the manual is for Lycomming and Continental, there is a section in the middle for Rotax and Jabiru.

How to delete all the system settings?
We don't have a way to delete all the settings, you should verify that they are correct for your engine. We ship the EFIS with setting that should be very close for your engine.

How to enable admin mode ..what is default password?
Admin mode should only be used for AFS Factory calibration, you should not need to change anything inside Admin mode.

[Alexw]

Why large sections of the manual for rotax and jabiru ? For lycoming just two line.

Most of the manual is for Lycomming and Continental, there is a section in the middle for Rotax and Jabiru.

How to delete all the system settings?
We don't have a way to delete all the settings, you should verify that they are correct for your engine. We ship the EFIS with setting that should be very close for your engine.

How to enable admin mode ..what is default password?
Admin mode should only be used for AFS Factory calibration, you should not need to change anything inside Admin mode.

Thanks for the answers!
How to restore settings that you shipped it (EFIS)?

[Rob Hickman]

We need the S/N for the screen.