PDA

View Full Version : Ghost traffic targets



brianjohnson
01-07-2014, 10:45 PM
I'm seeing a ton of traffic targets that don't exist. What do you need from me to help debug this issue? Also, when there are a lot of targets together on the map, it would be helpful if you grouped them together and only showed the closest one, otherwise they are all unreadable as they overlap quite a bit. It would also be nice to see altitudes on the synthetic vision display instead of just a big yellow dot. Thanks!

Rob Hickman
01-07-2014, 11:05 PM
I'm seeing a ton of traffic targets that don't exist. What do you need from me to help debug this issue? Also, when there are a lot of targets together on the map, it would be helpful if you grouped them together and only showed the closest one, otherwise they are all unreadable as they overlap quite a bit. It would also be nice to see altitudes on the synthetic vision display instead of just a big yellow dot. Thanks!

EFIS model?
software version?
ads-b receiver?
pictures of the map screen?

brianjohnson
01-07-2014, 11:10 PM
EFIS model?
software version?
ads-b receiver?
pictures of the map screen?

AF-5500
9.05.0
iLevil
I'll get back to you with pics as soon as I can

Rob Hickman
01-07-2014, 11:20 PM
Send us an email and we can send you the latest software to test, we are sending out 9.5.5

We are not seeing this with other ADSB units, if the 9.5.5 software does not fix it you should check with
Levil

amekler
01-08-2014, 02:46 AM
brian,
how dies your ildvil communicate with the 5500?
alan

brianjohnson
02-03-2014, 08:29 AM
It has a serial out with ADSB 115K. Also, depending on the map zoom level when you are in a very congested area (KPHX) the traffic targets make the map unreadable. I suggest that you group them together so they don't overlap and only show the altitude of the nearest target.


brian,
how dies your ildvil communicate with the 5500?
alan

amekler
02-03-2014, 05:12 PM
i'm looking at my ildvil. i see a usb -b port. is that what you connected to a serial port on the 5500?
Would it work on a 4500?
I currently use the ildvil for xavion.

Alan

brianjohnson
02-03-2014, 05:15 PM
No, you need to use the serial port. The pinouts are listed on the unit itself.


i'm looking at my ildvil. i see a usb -b port. is that what you connected to a serial port on the 5500?
Would it work on a 4500?
I currently use the ildvil for xavion.

Alan

amekler
02-03-2014, 06:16 PM
iis it the audio jack in the front near the on off?
alan

amekler
02-03-2014, 06:29 PM
brian, i have the sw model not the aw model
alan

brianjohnson
02-03-2014, 07:38 PM
I don't know the details of all the models, I'm sure you can get the relevant information if you contact them directly. They are very easy to work with.


brian, i have the sw model not the aw model
alan