PDA

View Full Version : skyview support



brianjohnson
12-09-2013, 11:41 AM
I have a couple questions from your VAF thread http://www.vansairforce.com/community/showthread.php?t=107346

First, what devices are supported on the skyview network? I know Dynon's ARINC module runs on it with their screens, is that possible with the AFS? If I have a pre-skyview 5000 screen what do I need to get the skyview network? It is possible to also upgrade my AHRS to the one that runs on skyview? If I could free up a couple serial ports it would allow me to get the mode s transponder and make a few other changes I've been wanting to do. Thanks.

Rob Hickman
12-09-2013, 07:07 PM
Currently we support the following devices on the Advanced-Skyview Network:

Primary ADAHRS
Backup ADAHRS
Com Radio

We are working on supporting more modules and don't currently have a time frame for their release. To run the Advanced-SV network you will need our new R7 baseboard, we are working on a upgrade price and should have it in the next few weeks.

Frank D
02-12-2014, 07:50 PM
Hi Rob, If I were to convert from SkyView to 5600 and 5800 screens, will the Dynon ADAHRS, ADS-B etc. components be compatible?
Thanks
Frank

Shawn McGinnis
02-13-2014, 09:20 AM
Correct, as Rob stated above the following devices on the Advanced SV Network:
SV-ADAHRS-200 Primary ADAHRS
SV-ADAHRS-201 Backup ADAHRS
SV-COM-C25 - Com Radio

As well as all 5000 series support the:
SV-ADSB-470 ADS-B UAT Band Traffic and Weather Receiver