PDA

View Full Version : Supporting AOA tubing...



mburbidg
11-28-2013, 11:04 PM
What are people using to attach the AOA tubing to support structures. I would like to attach the tubing to the static line where it goes through the fuselage. I assume that zip ties are not the best. They might pinch the tubing. I'm thinking of electrical tape.

Thanks,
Michael-

Rob Hickman
12-02-2013, 10:16 PM
I used tie straps and was careful not to get them too tight. I also used Velcro tape to hold a lot of the tubing and wiring in the plane.