PDA

View Full Version : ARINC to Serial 1?



Mgeiss
03-10-2013, 12:19 AM
In the Manual you write: The AF-ARINC module should be connected to EFIS Serial Port #3 or Serial Port #4. The Serial 3 & 4 are already used and i now install the ARINC an the AF Pilot.

Are there any Problems to connect the ARINC to Serial 1?

Markus

Rob Hickman
03-10-2013, 10:24 AM
You can use any serial port.

keemi1122
12-23-2014, 05:35 AM
The Serial 3 & 4 are already used and i now install the ARINC an the AF Pilot.........!!!!!!!!!!!!!!!

Rob Hickman
12-23-2014, 09:37 AM
so use serial 1 or 2 ...............!!!!!!!!!!!!!!!!!!!!!!!