PDA

View Full Version : Bezel Size



CharlieWaffles
04-24-2012, 08:01 PM
I see there is information for the cutout for the 5600 on the website, but what is the size of the unit once mounted? I am trying to determine how much real estate I need to leave around the hole for the unit to fit the bezel when mounted. Thanks!

Roy Thoma
04-25-2012, 09:59 AM
Mark,

Page 72 of the manual has the bezel dimensions. A link to the manual is at the top of the AF-5000 support page. Also note "For ease of service the panel should have 6-32 plate nuts installed for mounting the screens" at the top of the page. The mounting screws are installed from the front of the AF-5000 units, trying to install individual nuts from the back of the panel can be a challenge.

Regards,

Roy

N174RT (RV-7A) first flight 5/31/11, 240hrs as of April 2012:
Tip-up, Lycon IO-360 EXP, WW 200RV, AFS 5600, AF-Pilot, GNS-430W, SL-30, D100 for backup

CharlieWaffles
04-25-2012, 10:18 AM
Thanks, I had seen the cutout dimensions on the product page and then skimmed the manual, but missed that page. It was right under my nose. Thanks!