PDA

View Full Version : Flap Switch & Audio



Angier Ames
03-25-2012, 07:30 AM
My AOA Pro is in a Lancair 360 installation and not yet calibrated.
On startup I get the message "landing gear" and "AOA pass" and the AOA audio flows through a PS Engineering PMA4000.
When depressing the flap switch, the green donut toggles on or off but there is no audio "Flaps".
What could I have done incorrectly?

Thanks

Rob Hickman
03-26-2012, 03:44 PM
If it is a ProII you should hear Flaps when the donut turns on. It does not say flaps when the donut turns off.If you have the old Pro AOA I dont think it says flaps.