PDA

View Full Version : RPM slow to show



Wrgway
01-27-2012, 06:30 AM
After 250 hours of no issues my RPM indicator showed 0 on startup and took about 2-3 minutes of showing some rpm (not correct) to reading what appeared to be a correct rpm. I checked the sensor and all appears to be connected correctly and the sensor is snug in its fitting. Is this a sensor failing or should I look in another area?
Thanks,
Don
N346SS
RV-7

Rob Hickman
01-27-2012, 05:58 PM
Sounds like a bad connection or a bad sensor.

Wrgway
01-27-2012, 07:36 PM
Thanks Rob. I'm heading back to the airport in the AM and will check connections again but if the other option is a bad sensor I'll probably be ordering one tomorrow as connections all looked ok yesterday.
Thanks,
Don