PDA

View Full Version : Backup Battery Pack wiring



rleffler
06-28-2011, 02:50 PM
I was looking for how the backup battery pack is wired, but couldn't find any reference in the manual. Is it attached to Pin 15 or can Pin 15 be used for another power source (i.e. endurance bus)?

Trevor Conroy
06-29-2011, 08:10 AM
The backup battery pack is internal to the unit and on a separate set of wires directly attached to the circuit board internally. It has a 2-pin molex connector. Backup Power on pin 15 would be for an E-Bus (Essential Bus).