PDA

View Full Version : 4500 audio



amekler
03-13-2011, 11:03 AM
I just upgraded from the 3500. I have the audio set to 100% but I can bearly hear the warnings. With the 3500 they were very easy to hear.
Alan

Trevor Conroy
03-14-2011, 09:32 AM
Alan, do you have an intercom or audio panel?

amekler
03-14-2011, 11:18 AM
audiopanel pma8000

Trevor Conroy
03-14-2011, 04:12 PM
Which pin are you feeding the EFIS audio into?

amekler
03-14-2011, 04:36 PM
Trevor ,
I found the problem. On myLeft screen audio was set to 80% and on my 2nd screen 100%. When I changed the left screen back to 100% sound was normal again.
Alan

Trevor Conroy
03-14-2011, 04:55 PM
Alan, you should only have audio from one screen connected to your PMA-8000. You can just turn the volume down to 0% on the other unit. The unit in front of the pilot should be the one connected to the PMA-8000.

amekler
03-14-2011, 05:23 PM
roger
alan

HowardGMac
03-15-2011, 09:46 AM
Just a question for clarification. In a two screen setup if there is cause for the second screen to issue an audio warning that message is passed to the primary screen and the audio warning made there, correct ?

Trevor Conroy
03-15-2011, 10:00 AM
It doesn't exactly transfer the warning, but since all of the range files are the same, it triggers both screens if a sensor is out of range.