Paul Winkels
10-27-2010, 01:47 PM
In the latest AF-3000-4000 System Manual V7.1, on Page 85:
"Dual Screen Data Configuration
Any time engine or EFIS settings are changed you should transfer the files to both screens. One screen can get some of the configuration files from the neighboring screen in the Admin Menu. If both screens are on the Admin Page in the EFIS Calibration menu, select:
14. Request Remote Files
This will force the screen to get the configuration data files from the remote screen for those items that this screen is setup to receive and will reboot with the new files.
If the screen is setup to receive Air Module Data the following files will be transferred:
AIRDATA.AFD Airspeed, Altimeter, System Voltages
AOA.AFC AOA Calibration
If the screen is setup to receive Engine Data the following files will be transferred:
ENGINE.AFD Engine Gauges
TANKS.AFC Engine Gauges
Note: This works on non-S CPU units only. Units with the s-CPU must have the files transferred
manually through Calibration Menu -> Admin Settings -> Transfer Files To/From SD Card"
Can someone provide more detail on how to do this on an s-CPU system with dual screens (EF-4500/EM4500 in my case)? Which files need to be uploaded/downloaded to/from which display?
Thanks in advance,
Paul
"Dual Screen Data Configuration
Any time engine or EFIS settings are changed you should transfer the files to both screens. One screen can get some of the configuration files from the neighboring screen in the Admin Menu. If both screens are on the Admin Page in the EFIS Calibration menu, select:
14. Request Remote Files
This will force the screen to get the configuration data files from the remote screen for those items that this screen is setup to receive and will reboot with the new files.
If the screen is setup to receive Air Module Data the following files will be transferred:
AIRDATA.AFD Airspeed, Altimeter, System Voltages
AOA.AFC AOA Calibration
If the screen is setup to receive Engine Data the following files will be transferred:
ENGINE.AFD Engine Gauges
TANKS.AFC Engine Gauges
Note: This works on non-S CPU units only. Units with the s-CPU must have the files transferred
manually through Calibration Menu -> Admin Settings -> Transfer Files To/From SD Card"
Can someone provide more detail on how to do this on an s-CPU system with dual screens (EF-4500/EM4500 in my case)? Which files need to be uploaded/downloaded to/from which display?
Thanks in advance,
Paul