PDA

View Full Version : Faulty RPM Board



sjjonesnz
10-10-2021, 12:50 PM
Hi all, after starting my engine (Aerosport Power O320 with dual Lightspeed Plasma II+ ignition) I always turn each ignition off to make sure they're both working. Turning ignition 1 off everything is as expected however when I turn ignition 2 off the RPM indication on my AF3500-non S screens goes to 0 while the engine keeps making noise. That tells me the ignition systems are fine and I have an indication problem.

When I swap the red and yellow wires over the fault 'moves' from being with ignition 1 to ignition 2, which tells me the fault is on the RPM board.

How do I go about getting a replacement board?

Shawn McGinnis
10-11-2021, 09:53 AM
Give us a call at 503-263-0037 x 2 and let us know you need an 71420 RPM Board for your dual Lightspeed Plasma II+ ignition.

PII+ has a really fast pulse of 300ms @ 10V as its RPM signature so sometimes noise is an issue. Do you have the RPM shielded per their manual?

sjjonesnz
10-12-2021, 01:19 AM
Thanks Shawn, will do, and yes, it is shielded