sahrens
04-22-2021, 10:21 AM
In regard to this information
"Setting the Alert Tone Start Bar to 16 will cause the AOA tones to start beeping at the normal approach AOA and become a steady tone at the red bar (15% above stall)If you are using the AOA Pitot tube as the AOA pressure source you should set the 18. Landing Warning Override to 1.0 , The factory default setting of 8 is only for the wing pressure ports."
If I increase the Alert Tone Start Bar to a value other than 18 does that increase the speed when the tones begin?
Thanks
"Setting the Alert Tone Start Bar to 16 will cause the AOA tones to start beeping at the normal approach AOA and become a steady tone at the red bar (15% above stall)If you are using the AOA Pitot tube as the AOA pressure source you should set the 18. Landing Warning Override to 1.0 , The factory default setting of 8 is only for the wing pressure ports."
If I increase the Alert Tone Start Bar to a value other than 18 does that increase the speed when the tones begin?
Thanks