PDA

View Full Version : XP-360 Horsepower chart



anymouse
07-28-2010, 06:54 PM
Anyone have a calibration chart for an XP-360? The graph that came with my manual seems to leave a bit to be desired. When I use it, I only come up with four data points that have both 55% and 75% power. Also, I can't figure out how to get the HP Delta.

This is what I get. The left numbers are 55% and the right numbers are 75%...


2000 21.9
2100 21.4
2200 20.8
2300 20.3 25.5
2400 19.9 24.8
2500 19.4 24.2
2600 19.1 23.7
2700 xx.x 23.4

anymouse
08-02-2010, 07:22 PM
Bueller? Bueller??

Trevor Conroy
08-04-2010, 09:37 AM
Hello, the HP delta is explained below. You will have to get the data from your engine manufacturer.


The following data is supplied only as a reference; you should use your Lycoming engine graphs to verify
the accuracy of the display. The Delta HP number is the increase in actual HP that the engine will
produce for the same manifold and RPM at increased Altitude.

anymouse
08-04-2010, 10:37 AM
Thanks Trevor. Unfortunately, the manual from Superior doesn't seem to show that. Or at least I can't figure it out.

Guess I'll have to play with it again in a couple months. Gotta go to work now and won't be back until October.

If anyone has a ready made chart for the XP-360, feel free to send it to me.