PDA

View Full Version : Manual Corrections - 430 Channel 1 RS-232 Settings



dnelson
07-28-2010, 11:21 AM
Hi AFS,

With reference to V7.0 of the manual, I noticed the following inconsistency:

Page 55 (Garmin 430W/530W): The RS232 Channel 1 settings are 'ARNAV/ie-fuel|AVIATION'

Page 85 ('ARINC 429 Main Cable' Schematic): The '430 Settings' states to set RS232 Channel 1 to OFF|AVIATION.

Also, might you consider adding a forum dedicated to 'Manual Corrections'? I think this would be a good way to get updated information and corrections (not only technical but also typographical).

Thank you,
/\/elson

Trevor Conroy
08-02-2010, 09:16 AM
Thank you!

kentb
08-02-2010, 01:23 PM
Page 55 (Garmin 430W/530W): The RS232 Channel 1 settings are 'ARNAV/ie-fuel|AVIATION'

Page 85 ('ARINC 429 Main Cable' Schematic): The '430 Settings' states to set RS232 Channel 1 to OFF|AVIATION.

/\/elson

Trevor, which is correct?

Kent

Trevor Conroy
08-02-2010, 01:36 PM
Page 55 is correct. 430W should be set to ARNAV/ei-fuel | AVIATION