PDA

View Full Version : % power IO-360



flyvans.com
03-08-2010, 02:57 AM
hi,

has anybody figured out the correct % power values for an IO-360 180+h.p. with electronic ignition and horizontal induction?
i'm trying to use a lycoming IO-360-M1B chart as a reference from the operators manual as the best i could find, but it is overly complicated to "reverse engineer" as it was meant to be used in the other direction.

i'm aware that it will be impossible to find a chart for our exact engine config: TMX-IO-360 with ECI cold air induction, ECI fuel injection, 1 mag, 1 pmag.

thanks for pointers,
bernie

www.flyvans.com

flyvans.com
03-12-2010, 02:57 PM
John Goldsmith was kind enough to share his data-mining work.

http://www.flyvans.com/wordpress/wp-content/uploads/2010/03/IO-360-M1B-performance-data.xls

feel free to reuse.

dnelson
03-13-2010, 10:01 AM
Thanks for sharing John and Bernie!

/\/elson

rushmckelvey
02-20-2011, 12:03 PM
Thanks for the INFO

Rush McKelvey

anymouse
02-21-2011, 12:45 PM
John Goldsmith was kind enough to share his data-mining work.

http://www.flyvans.com/wordpress/wp-content/uploads/2010/03/IO-360-M1B-performance-data.xls

feel free to reuse.

Thanks!!

Hopefully, this will work with a Superior XP-IOF-360 as well. Almost anything beats seeing 40% on takeoff! :rolleyes:

jkgoblue
02-25-2011, 03:11 PM
Does anyone have a similar spreadsheet for the IO-390?

DONVS
02-25-2011, 07:46 PM
And maybe one for the IO360 200HP Angle valve TIA Don VS

bigbird
03-27-2011, 02:54 AM
Does anyone out there have the % power figures for an IO390EXP?

lancair390
04-02-2011, 01:37 PM
I have a power table from Lycoming for the 390 and tried to convert this. But the result was not good.
Can anybody give me some help to find the proper numbers

Christian

Lancair LNC2 OE-VCM

lancair390
09-22-2014, 08:07 AM
Here are my % power settings for the IO390.
Make sure there are no empty set points. This was my problem for a long time...

Christian

222