PDA

View Full Version : Ethernet hub issues



Cojaken
12-06-2018, 06:26 PM
When my two screens are connected together with an ethernet cable, they talk to each other.
When they are connected via a hub, they do not.
My AF3500EM talks to my Wxworx XM receiver via the hub. The AF5400T does not. I am going to swap out the cable that connects the AF5400T to the hub in case it is the problem, but would welcome any other suggestions.

Cojaken
12-09-2018, 11:28 AM
When my two screens are connected together with an ethernet cable, they talk to each other.
When they are connected via a hub, they do not.
My AF3500EM talks to my Wxworx XM receiver via the hub. The AF5400T does not. I am going to swap out the cable that connects the AF5400T to the hub in case it is the problem, but would welcome any other suggestions.

It was indeed a bad ethernet cable from the AF5400T to the hub.