PDA

View Full Version : AF-4500 FIS-B



Blain
10-05-2018, 04:21 PM
Should FIS-B display on my 4500 now?

Shawn McGinnis
10-09-2018, 03:28 PM
Yep, to enable ADS-B Weather go to any map page and press [SETTINGS] -> [WX] -> [WX: ADS-B]

Blain
10-09-2018, 07:38 PM
I’ve done that. I get traffic but not showing weather.

Shawn McGinnis
10-10-2018, 01:04 PM
You may have NXRD turned off. Does toggling the NXRD button do anything?

ADS-B Status Information [CHECK] -> [MAINT] -> [ABOUT]
The ABOUT page displays pertinent information about the status of your ADS-B Weather receiver.
Weather Status - Shows status information about the ADS-B interface.
Not Parsing ADS-B Weather - The EFIS is not receiving FIS-B weather data
ADS-B Mode - Displays either Master or Slave mode (Unit wired to the ADS-B device will be Master)
Ownship Count - Number of messages the EFIS is receiving from the ADS-B device. Verifies connectivity
Aged Times - Elapsed time since the last data update (METAR, TAF, TFR, NEXRAD, Winds, Lighting)