PDA

View Full Version : AOA Pro II & Glastar



jcar02
05-21-2018, 04:29 AM
I have an AOA pro that I purchased some time ago. Glad to see the company passed hands twice and is still supported. I would like to install the unit on my Glastar and would like to know if there are any firmware upgrades I need to perform before installation. Also, can I use the Dynon Pitot probe heated with the AOA Pro II? Did not see any install docs using the probe? Do you have a 28 Volt version of the Pitot probe?

PN/ AOA pro II 1101V6
SN/ 633

Thank you
John Car

Shawn McGinnis
05-21-2018, 11:06 AM
There is a V7 upgrade available, the only change was to eliminate aural FLAPS as flaps go up. Flaps only with flaps going down.

jcar02
05-21-2018, 01:32 PM
Great, what about the other questions I have?

Shawn McGinnis
05-21-2018, 04:31 PM
Can I use the Dynon Pitot probe heated with the AOA Pro II? Yes, this is what we call a Pro III system
Did not see any install docs using the probe? 441
Do you have a 28 Volt version of the Pitot probe? No Dynon doesn't have a 28V option.

jcar02
05-23-2018, 04:00 AM
Can I use my Pro II with a Pitot probe?

jcar02
05-25-2018, 08:00 AM
Can I use my Pro II with a Pitot probe?


Can I use the pro II with the Dynon Pitot probe?

Shawn McGinnis
05-29-2018, 09:03 AM
Yes, after changing out the fittings a Pro II with the proper fittings for a Dynon Pitot Tube we call it a Pro III.