View Full Version : RPM indication with emags

12-19-2017, 01:35 PM
I've just replaced my conventional mags with electronic emags.
I moved the rpm wire from pin 32 to pin 33 on the D sub on the 4500EM as shown in the available info but my rpm reading is way too high; showing 2700 at around 1000.
Any idea what I did wrong please?

Rob Hickman
12-19-2017, 02:55 PM
Change the pulses per rev setting in calibration

12-19-2017, 03:53 PM
Thanks for the quick response Rob.