PDA

View Full Version : AOA audio missing



fjerstade
12-06-2017, 02:45 PM
I finally got around to calibrating my AOA (Dynon heated pitot / AOA with AF5600), works well, but no audio. I have the audio "on" (bar over AOA on EFIS page) and audio "on" on the "set - cal" page. Other audio alerts work fine (altitude, traffic, oil pressure, fuel qty, AP on/off, etc.).

Shawn McGinnis
12-06-2017, 03:05 PM
With a Dynon Pitot Tube installed start with a Landing Warning Override of 2, Wing Port users should start at 8.

Lower the number if the warnings don't occur as you flair for landing. Raise the number is the warning doesn't stop when taxiing.


SET -> Hold CAL -> Angle of Attack (AOA) -> Landing Warning Override (psf)