PDA

View Full Version : Network failing between units



PAN-Denmark
04-25-2017, 11:41 AM
Hi,
I have 2 AFS 5600 rev 1. PFD is set to have address 175 and MFD to have 176.

Up until now they have been communicating flawlessly, but now somethings gone wrong and the units are not communicating any more. When I have the crossover cable in there is no communication and the network card lights solid green and regular frequency flashing yellow. If I remove the network cable the lights are the same.

I think I can trace the problem back to when I did the cabling for the back.up power to the EFIS Extension D-Sub on pin 6 (power) and 15 (ground). The ground wires are connected but the power is still to be connected. Can this be the reason ?

Is there any way to test the network ?

rgds
Per
Copenhagen

Shawn McGinnis
04-25-2017, 03:09 PM
Email us a picture of your Admin Settings pages to support@advanced-flight-systems.com. The LED's aren't wired to be network activity indicators. They are purely hardware diagnostic.

PAN-Denmark
04-25-2017, 11:10 PM
Will do. So static green and flashing yellow is = Hardware ok ?

Shawn McGinnis
04-26-2017, 10:01 AM
Yes. Green is a power indicator, yellow is a heartbeat indicator.

PAN-Denmark
05-02-2017, 12:55 PM
tried a new crossover cable - and problem was resolved... REALLY WEIRD !!

Shawn McGinnis
05-02-2017, 04:50 PM
Glad to hear it worked. Let me know if the problem repeats.