View Full Version : Serial port assignments
fjerstade
11-28-2016, 05:27 PM
I have the following equipment from my order with a 5600, which totals 5 serial ports. What is the appropriate assignment? It seems from the discussion that port 0 isn't available.
AFS GPS 73102
IFD 540
AFS ADSB (74112)
PAC15
Transponder (74109)
Recommendations?
Shawn McGinnis
11-28-2016, 06:54 PM
Your order has the SV-ADAHRS, so you have access to serial 0.
361
rleffler
12-17-2017, 07:38 PM
Shawn,
Currently my 5500 serial ports are configured as:
PFD
0 - disabled
1 - atvn/arnav
2 - vpx
3 - Vizion AP
4 - arinc
MFD
0 - disabled
1 - Navworx adsb
2 - trfc/icarus
3 - coguardian
4 - AFS gps 250
I am getting ready to install the Dynon 261 transponder and the Dynon 472 adsb. Are there any limitations with what can be installed on port 0? Will port 0 work for the transponder?
Thanks,
Bob
Shawn McGinnis
12-18-2017, 10:53 AM
No limitations, use PFD for the transponder and MFD for the ADS-B.
rleffler
12-18-2017, 11:11 AM
No limitations, use PFD for the transponder and MFD for the ADS-B.
thanks! Now I just have to wait for Dynon to start shipping
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.