PDA

View Full Version : AFS ARINC install support



rvdave
05-07-2016, 01:02 PM
I am installing the IFD540 tray & connectors, the system is looking for 6 ARINC inputs, 4 for gps, 2 for VOR/ILS. There are only 2 supplied pins 13,25 ARINC out for gps and VOR/ILS. How do I get data from the AF-ARINC module for additional gps and VOR/ILS? Is it a resolution to split that signal and use it for all? The output also goes to autopilot.

Rob Hickman
05-09-2016, 04:56 PM
The IFD-540 wires just like the 430W/530W and does not require 6 ARINC inputs. Send me an email and I can send you a drawing.

Rob@Advanced-Flight-Systems.com