PDA

View Full Version : Tach input with Lightspeed



drholling
01-27-2016, 03:17 PM
Is there a way to use the tach input with a Lightspeed Plasma II ignition? I have a dual electronic ignition install and no mag to use your pickup. Perhaps there is something that would attach to the mechanical tach output and provide an appropriate input to the AFS? Or a similar jumper mod??

Thanks,
Dave

Shawn McGinnis
01-27-2016, 05:49 PM
You will want to use our 71420 RPM Interface Board. It connects to both of the Lightspeed outputs.

drholling
02-01-2016, 03:38 PM
I don't see it in the Web Store. How much are they and how do I order one?

Thanks,
Dave

Shawn McGinnis
02-01-2016, 05:58 PM
Call Tricia at 503-263-0037 x 2 and she will get you setup.

drholling
02-24-2016, 09:22 AM
Call Tricia at 503-263-0037 x 2 and she will get you setup.

OK, I have the board now but no connection information. Please point me to the wiring info.

Thanks,
Dave

Shawn McGinnis
02-24-2016, 11:03 AM
292

For the 2500 use:
Red to 5V DIGITAL
Black to COMMON
White to RPM

drholling
02-24-2016, 02:54 PM
Thanks.

Dave