View Full Version : MAP Dampening
jearly
09-15-2015, 01:52 PM
Is it recommended/required to dampen the MAP between the cylinder head and the MAP sensor?
jearly
09-15-2015, 04:45 PM
If so... what if the best or recommended method?
Shawn McGinnis
09-17-2015, 03:18 PM
We don't currently specify any additional buffer within the installation
Manual v4 Pg 221: The manifold pressure transducer should be mounted on the firewall or in the cabin area. The transducer port is connected to the engine manifold pressure port with a ΒΌ” ID hose and hose clamp. The manifold pressure port location can be found in the engine manual.
jearly
09-18-2015, 07:03 AM
Thanks Shawn
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.