PDA

View Full Version : Using Dynon capacitive sender adapter with AF-2500



drholling
08-31-2015, 09:08 AM
Is it possible to use the Dynon adapters with an AF2500?

Thanks,
Dave

drholling
09-01-2015, 07:11 AM
Is it as simple as cutting JP6 & JP7? Then use the 5V supply, ground, and tank connections to connect to the Dynon senders?

Dave

Shawn McGinnis
09-08-2015, 11:54 AM
Correct, here is the official blurb :

To convert from FLOAT to CAPACITANCE style senders Cut the JP6 and JP7 jumpers found directly under the “Float Fuel” label on the rear of the PCB. Take care
not to damage the PCB and ensure the jumper is completely removed with ohmmeter.

Then recalibrate the system.

drholling
01-27-2016, 03:17 PM
Thanks, Shawn. They are working great.

Thanks,
Dave



Correct, here is the official blurb :

To convert from FLOAT to CAPACITANCE style senders Cut the JP6 and JP7 jumpers found directly under the “Float Fuel” label on the rear of the PCB. Take care
not to damage the PCB and ensure the jumper is completely removed with ohmmeter.

Then recalibrate the system.