PDA

View Full Version : Afs comm no squelch control



rvdave
07-16-2015, 07:39 AM
I've got the AFS comm installed, configured to network, but cannot control squelch thru inst calibration. It shows up as SV-Com-Panel, enabled. I have open squelch on headphones, can hear transmitted audio, but cannot close squelch thru control on efis. Do have the network cable attached and can swap from efis. Goes to normal if I turn comm off. Not sure where to go from here.

rvdave
07-17-2015, 03:27 PM
Operator error I found out accidentally, the squelch doesn't actually change until setting is saved, problem solved, or rather resolution discovered.