rv7charlie
06-28-2015, 09:05 AM
Hi,
1st post; I've recently acquired a new-to-me AF4500sEE (includes engine monitor, moving map, etc), AFS Pilot, ARINC module, Garmin 430 (old 24V, non-WAAS), and Garmin 327 transponder. The EFIS came without probes/sensors, and none of the equipment came with wiring harnesses.
I've been perusing the v7.4 user/installation guide, along with the autopilot manual and Garmin manuals, and have questions.
1st, do the wiring diagrams in the install manual show all connections needed to get the EFIS, autopilot, 430 (including both GPS & Nav/glideslope functions), and 327 fully functional and communicating? If not, is there anyone out there with similar equipment that would be willing to share their wiring diagram?
2nd, since the EFIS came without probes/sensors, I'd like to know whether I can use some/all of my existing engine sensors, OAT probes, etc. Is there a cross reference list from AFS sensor models to generic 'off-the-shelf' sensors?
EDIT: Should have mentioned, the engine is *not* a Lyc, though the existing engine sensors appear to be the same as used by Van's, GRT, etc. Engine is a Mazda Renesis, so I'll need water temp/pressure in addition to typical Lyc sensors.
Thanks for the help,
Charlie
1st post; I've recently acquired a new-to-me AF4500sEE (includes engine monitor, moving map, etc), AFS Pilot, ARINC module, Garmin 430 (old 24V, non-WAAS), and Garmin 327 transponder. The EFIS came without probes/sensors, and none of the equipment came with wiring harnesses.
I've been perusing the v7.4 user/installation guide, along with the autopilot manual and Garmin manuals, and have questions.
1st, do the wiring diagrams in the install manual show all connections needed to get the EFIS, autopilot, 430 (including both GPS & Nav/glideslope functions), and 327 fully functional and communicating? If not, is there anyone out there with similar equipment that would be willing to share their wiring diagram?
2nd, since the EFIS came without probes/sensors, I'd like to know whether I can use some/all of my existing engine sensors, OAT probes, etc. Is there a cross reference list from AFS sensor models to generic 'off-the-shelf' sensors?
EDIT: Should have mentioned, the engine is *not* a Lyc, though the existing engine sensors appear to be the same as used by Van's, GRT, etc. Engine is a Mazda Renesis, so I'll need water temp/pressure in addition to typical Lyc sensors.
Thanks for the help,
Charlie