PDA

View Full Version : Verify pin-out



Blain
06-07-2015, 06:34 PM
Looking for verification of my connections. Equipment; AFS 4500EE, GTX 327, Icom A-210, GPS puck #73102, and possible future Navworks 600.

Hers is what I see;
AFS Main cable>pin 18>A-210 pin D (aux audio #1)
AFS>pin 16 shielded gnd>A-210 pin 4 shielded gnd
AFS>pin 13>GTX 327>pin 19 (encoder)
AFS>pin 25>Navworks ADSB (?)

Of coarse there are other connections but these I am unsure of.

And another question while I'm here, can the 4500 pass through frequency commands from the GPS database?

Shawn McGinnis
06-08-2015, 05:55 PM
The NavWorx will need to use serial #1 or #3 to the ADSB format and also receive the ICARUS data that is sent to the 327.

Page 50 of the AF-4500 manual v7.4 shows this in more detail.

Blain
06-11-2015, 07:59 PM
The NavWorx will need to use serial #1 or #3 to the ADSB format and also receive the ICARUS data that is sent to the 327.

Page 50 of the AF-4500 manual v7.4 shows this in more detail.

Thanks Shawn, that answers the Navworks connection. What about the comm freq feed?

Shawn McGinnis
07-06-2015, 04:33 PM
I don't really know anything about the Icom equipment but from the pdf's available online the wiring looks correct.

Reference:
http://www.aeroelectric.com/Installation_Data/ICOM/A210/A210_IM.pdf (http://www.aeroelectric.com/Installation_Data/ICOM/A210/A210_IM.pdf)

Blain
07-06-2015, 07:40 PM
Use serial data? TXD and RXD?

Shawn McGinnis
07-07-2015, 08:56 AM
Yes most devices require both transmit and receive. ADS-B does and 327 receives ICARUS altitude.