PDA

View Full Version : Missing Crosswind Component and Attitude off



Wicked Stick
05-28-2015, 07:50 PM
I've recently removed the lithium battery and the Clock battery so that I could install new ones as the existing ones were over 5 years old.
On a recent flight I noticed that the crosswind component displays no data and the vertical attitude when flying straight and level show the plane is in a descent.
See the picture below.

Rob Hickman
06-02-2015, 08:40 AM
Try doing a SET NVRAM DEFAULTS in the calibration menu, you will need to set the Page List, Knob List, Pitch and Autopilot EFIS settings.