PDA

View Full Version : rotax 912iS sport throttle position



neville
03-05-2015, 08:10 AM
With the upgrade of the rotax 912iS to 912iS sport the starting sequence changed in that the throttle position
prior to start is now dependent on outside temperature. It is my impression that the CAN buss provides throttle position in % (see graph in operators manual, section 3). Is there a possibility that that information could be added to the engine page?

Rob Hickman
03-05-2015, 01:56 PM
If it is in the CAN buss data it should not be difficult to add it.

neville
03-07-2015, 07:03 AM
Rob, I contacted Rotax they replied to the affirmative that the CAN buss contains throttle position in percent. I would appreciate your adding it to the list of things to do.

Rob Hickman
03-08-2015, 01:51 PM
What version of software are you currently running?

neville
03-09-2015, 06:59 AM
Software installed: V X10.04.16-MV16 (Dec 18 2014)
OS: 1 (Dec 2 2011)
FS: 1.0
BB; 5
NXP: 2.11
Net: 6.3
ARNIC: NA

neville
04-18-2015, 06:59 AM
I see on the Rotax Owners Forum that some operators are asking their EFIS manufacturer for the addition of throttle position , mainly for ease of adjusting throttle for ECO
(fuel economy) position.