PDA

View Full Version : Expansion cable connection



rvdave
01-22-2015, 10:09 AM
Im hooking up the afs gps to the expansion connector. One diagram shows drawing power from pin 1 of expansion receptacle, another shows drawing power from main cable pin 6, the old oat terminal. Is either/both correct?

Rob Hickman
01-22-2015, 03:56 PM
http://www.advanced-flight-systems.com/Support/AF-5600/AF-5000%20User%20and%20Installation%20Manual%20V3.00. pdf

Page 151 and 152

If you purchased the EFIS in the last 15 months you have rev 7 hardware (also on the P/N tag) use page 152

rvdave
01-22-2015, 06:45 PM
Perfect, thanks again