rvdave
01-22-2015, 10:09 AM
Im hooking up the afs gps to the expansion connector. One diagram shows drawing power from pin 1 of expansion receptacle, another shows drawing power from main cable pin 6, the old oat terminal. Is either/both correct?
Rob Hickman
01-22-2015, 03:56 PM
http://www.advanced-flight-systems.com/Support/AF-5600/AF-5000%20User%20and%20Installation%20Manual%20V3.00. pdf
Page 151 and 152
If you purchased the EFIS in the last 15 months you have rev 7 hardware (also on the P/N tag) use page 152
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.