View Full Version : Expansion cable connection
rvdave
01-22-2015, 09:29 AM
Im hooking up the afs gps to the expansion connector. One diagram shows drawing power from pin 1 of expansion receptacle, another shows drawing power from main cable pin 6, the old oat terminal. Is either/both correct?
rvdave
01-22-2015, 03:36 PM
Ok I see p 237 shows 8v out @ 350 ma for pin 1. This should be ok for afs gps?
Rob Hickman
01-22-2015, 03:54 PM
If you purchased your EFIS in the last 15 months you have REV 7 hardware.
http://www.advanced-flight-systems.com/Support/AF-5600/AF-5000%20User%20and%20Installation%20Manual%20V3.00. pdf
Page 152
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.